Citizen iDP-3210 Manual De Usuario

iDP-3210 User’s Manual

   

 

                                                                            61/67

  CITIZEN

(36)  Starting / Ending Macro Definition  (GS :)

  Code : [1D]h + [3A]h
  Specifying starting / ending macro definition.  Maximum content available for macro

     definition is 2048 bytes.  A portion exceeding 2048 bytes is not defined.

•

 Even with ESC @ (initialization of the printer) having been executed, defined content is not

cleared.  Therefore, it is possible to include ESC @ into the content of macro definition.

•

 Normal printing operation is carried out even while in macro definition

    (37) Macro Execution  (GS^     n1  n2  n3)

  Code : [1D]h + [5E]h + n1 + n2 + n3
        * {0 is less than or equal to n1 is less than or equal to FF}
           {0 is less than or equal to n2 is less than or equal to FF}
           {0 is less than or equal to 3 is less than or equal to 1}  Data is described in Hex code.
 Executing contents defined in macro.

•

 "n1~n3" indicate as follows:

n1

: The number of times of macro execution

n2

: Waiting time on macro execution

Waiting time of n2 x 100 msec is given for every execution.

n3

: Macro execution mode

n3

Mode

0

  Continuous execution

1

  Execution by the paper feed SW

Continuous execution

: The Macro is executed n1 times continuously at the time

intervals specified by n2.

Execution by FEED SW

: After waiting for lapse of time specified by n2,

                                      the ERROR LED flickers and the paper feed switch is waited
                                      to be pressed. When it is pressed, the macro is executed once.
                                      This action is repeated n1 times.

•

 When this command is received while in macro definition, suspension of macro definition

  is indicated.  At this time, the defined content is cleared.

•

 No execution takes place when macro is held undefined or n1=0.

•

 While in macro execution with n3=1, paper feed with the FEED SW is not available.