Cino MP3200 Manual De Usuario

Command Descriptions 

‹

Modular check character is processed as follows: 

„

Automatically added when processing data is 7 byte. 

„

The 8th byte data is processed as a modular check character when processing data is 
8 byte. In this case, modular check character is not checked. 

‹

Left guard bar/center bar/right guard bar are added automatically.

‹

The printer processes the start code (ASCII = */ Hex = 2Ah/Decimal = 42) as follows: 

„

When the first bar code (d1) is “*”, the printer processes the data as a first character.

„

If the first bar code (d1) is not “*”, the printer adds a start character (*) automatically.

‹

The printer processes the start code (ASCII = */ Hex = 2Ah/Decimal = 42) as follows: 

„

When the last bar code (dk or dn) is “*”, the printer processes the data as a last 
character.

„

If the last bar code (dk or dn) is not “*”, the printer adds a last character (*)
automatically.

„

When “*” is processed during bar code data processing, the printer processes “*” as a 
stop character. The printer prints data preceding “*” and finishes command processing.
Therefore, data following “*” are processed as normal data.

‹

Check digits are not calculated and added. 

167

Preliminary Rev. 02