Cino MP3200 Manual De Usuario
Command Descriptions
Programming Reference
VERSAJET MP3200
For CODE128 ( m = 73) process
Make sure to specify start character. The start character must be code set selection
character (any of CODE A, CODE B, or CODE C) which selects the first code set.
character (any of CODE A, CODE B, or CODE C) which selects the first code set.
Stop character is added automatically.
In CODE A, following data can be used.
Character data: It is specified by ASCII code [in hexadecimal: 20H ~ 5FH in decimal:
32~95]
32~95]
Control character data: It is specified by ASCII code [in hexadecimal: 00H ~ 1FH / in
decimal: 0~31]
decimal: 0~31]
Special character data: (FNC 1, FNC 2, FNC 3, FNC 4, SHIFT, CODE B, CODE C):It is
specified “{+ character code" as 2 byte. (It is described separately.)
specified “{+ character code" as 2 byte. (It is described separately.)
169
Preliminary Rev. 02