Samsung ML-3560 Series Manual De Usuario

Descargar
Página de 124
Solving Problems
7.12
N
OTE
: When you encounter the problems about the optional 
hard disk, call for service.
Ready 
Replace Cart
The life of some parts on 
the toner cartridge ends.
The overflow of the waste 
toner contaminates the 
inside of the machine.
Regardless of the remaining 
toner, this is warning 
message showing that the 
toner cartridge replacement 
is needed as the parts life 
there of is exhausted. The 
toner cartridge is at the end 
of its life and the print 
quality lowers, you need to 
replace the cartridge to new 
one.
Replace
Cartridge
The toner cartridge is 
out of its life.
Replace the toner cartridge. 
Sleeping
The printer is on Power 
Save mode.
When data is received, it 
switches to on-line 
automatically.
Reset Now
The network card is 
initializing.
Wait until the message is 
cleared.
Restore
The printer settings or 
network settings are 
turning to their default 
value.
Wait until restoring is 
complete.
Tray 1
Open
The Tray 1 is open and 
also there is no paper in 
the Multi-Purpose Tray.
Close the Tray 1 or load 
paper in the Multi-Purpose 
Tray.
Tray 2
Open
The optional Tray 2 is 
open and also there is 
no paper in the Multi-
Purpose Tray.
Close the optional Tray 2 or 
load paper in the Multi-
Purpose Tray.
Message
Status
Do this...
Common Windows Problems
N
OTE
: Refer to Microsoft Windows 9x/Me/NT 4.0/2000/XP/
2003 User’s Guide that came with your PC for further 
information on Windows error messages.
Common Macintosh Problems
Problem
Possible Cause and Solution
“File in Use” message 
appears during 
installation.
Exit all software applications. Remove all software 
from the StartUp Group, then restart Windows. 
Reinstall the printer driver.
“Error Writing to LPTx” 
message appears.
• Ensure that the cables are connected correctly, 
the printer is on.
• If bi-directional communication is not turned on 
in the driver, it will also cause this message.
“General Protection 
Fault”, “Exception OE”, 
“Spool32”, or “Illegal 
Operation” messages 
appear.
Close all other applications, reboot Windows and 
try printing again.
“Fail To Print,” “A 
printer timeout error 
occurred,” messages 
appear.
These messages may appear during printing. Just 
keep waiting until the printer finishes printing. If 
the message appears in standby mode or after 
printing has been completed, check the connection 
and/or whether an error has occurred.
Problem
Possible Cause and Solution
The printer does not 
print a document from 
Acrobat Reader.
You should change the Print Method option to 
Print as Image when you print from Acrobat 
Reader.
The document has 
printed, but the print 
job has not 
disappeared from the 
spooler in Mac OS 
10.3.2.
Update your Mac OS to OS 10.3.3 or higher.