Samsung ML-3560 Series Manual De Usuario

Installing Printer Options

9.1

Your printer is a full-featured laser printer that has been 
optimized to meet most of your printing needs. Recognizing 
that each user may have different requirements, however, 
Samsung makes several options available to enhance the 
printer’s capabilities.

This chapter includes:
• Precaution When Installing Printer Options
• Installing Memory DIMM
• Installing a Network Card
• Using the Hard Disk
• Installing an Optional Tray 2
• Installing a Duplex Unit

Never remove the printer control board while the printer is 
plugged in.
To avoid the possibility of an electrical shock, always disconnect 
the power cord when installing or removing ANY internal or 
external printer option.

The control board and internal printer options (Memory DIMM, 
Network Card and Hard Disk) are sensitive to static electricity. 
Before installing or removing an internal option, discharge 
static electricity from your body by touching something metal, 
such as the metal back plate on any device plugged into a 
grounded power source. If you walk round before finishing 
installation, discharge any static electricity once again.

Your printer has a dual in-line memory module (DIMM) slot. Use 
this DIMM slot to install more memory for the printer.

: Your printer has 32 MB of memory which can be 

expanded to 288 MB. Use only the Samsung-approved DIMM. 

Contact your Samsung dealer.

Turn the printer power off and unplug all cables from the 
printer.

Remove the duplex-slot cover from the back of the printer. 
If you installed an optional duplex unit, remove it from the 
printer.