Samsung SCX-5935 Series Manual De Usuario

Machine status and advanced feature_ 95

You may set up the network with the machine's touch screen. Before doing 

that, you must have the relevant information concerning the type of network 

protocols and computer system you use. If you are not sure which setting to 

use, contact your network administrator to configure this machine to the 

network.
1. Press Machine Setup on the control panel.

There are lots of parameters to be set. 

Therefore, if you are not sure, leave as is, or 

consult the network administrator.

2. Press Admin Setting. When the login message pops up, enter 

password and press OK.

3. Press the Setup tab > Network Setup.

The machine does not accept faxes sent from 

remote stations if their numbers are stored in the 

memory as junk fax numbers. You can enter a 

maximum of 10 junk fax numbers. Press Junk 

Fax Setup, select number and Edit. then, enter 

the last numbers (1~7 digit) of the fax number.

This feature adjusts the ring volume. When you 

select Off, the machine does not ring.

When you press On Hook Dial to send a fax, you 

can hear a specific tone. To adjust the tone 

volume, use this feature. Value 1 is the lowest 

volume. Use left/right arrows to adjust the value. 

•

Document Policy :  You can set the document 

stored in Mailbox to delete or retain documents 

after completion. Select On for each option to 

delete, Off to retain the data.

•

Mail Configuration :  You can create, edit, or 

delete Mailbox. Enter Mailbox ID, Mailbox 

Name, Mailbox Passcode by pressing options. 

(See "Using mailbox" on page 87.)

If you set the Notification option to On, you 

are notified when a fax is received in 

Mailbox. (See "Creating Mailbox" on 

page 87.)

This feature lets you select the paper tray to use 

for receiving a fax.

Set the machine to send a fax in the toll save time 

for saving. (See "Sending a fax in toll save time" 

If the fax number you have dialed is the same as 

the delay fax number, the machine asks whether 

you want to add the documents to the reserved 

delay fax. (See "Adding documents to a reserved 

delay fax job" on page 84.)

You can forward a sent or received fax to other 

destinations via fax or email. (See "Forwarding a 

fax to other destination" on page 88.)

This setting determines whether the end fax tone 

is on or off. When the fax receiving job is finished, 

machine will give an signal sound. (See "Setting 

Select appropriate protocol and configure 

parameters to use the network environment.

For Macintosh network environments, select this 

option. This option provides packet transmission 

and routing functionality for networking.

Configure the network transmission speed.

Reverts the network settings to the default values.