Samsung SCX-5935 Series Manual De Usuario

Machine status and advanced feature_ 96

This feature lets you control and lock all outgoing data, or change the 

password.
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, then enter 

password and press OK.

3. Press the Setup tab > Authentication.

When you want to add the optional features for this machine, you have to 

install the optional kit, and then, set the machine to enable, and activate 

those features. To enable those features, follow the steps below: 
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, then enter 

password and press OK.

3. Press the Setup tab > Optional Service.

You can print a report on the machine's configuration or font list, etc.

1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, then enter 

password and press OK.

3. Press the Print/Report tab.

Enables authentication mode 

which can be used for job 

accounting plug-in in the 

SyncThru™Web Admin Service .

It disables Authentication Mode.

You can change the password for 

the Admin Setting authentication.

If you are not using the network scan feature, 

select Disable, then the Scan icon on the display 

will be grayed out.

If you are not using the fax feature, select Disable, 

then the fax icon on the display will be grayed out.

This feature is deleting all the information on HDD 

for security reasons. You cannot recover the 

information once it’s been deleted. System 

administrator deletes all the information on HDD. 

From the General tab, select On Demand 

Overwrite > Enable. 

This feature is deleting a specific job information 

on HDD for security reasons. After a job stored on 

the HDD is completed, it’s information is 

automatically deleted. You cannot recover the 

information once it’s been deleted. From the 

General tab select Immediate Image 

Overwrite>Enable.

You can print Network 

Configuration, PS3 Font List, 

PCL Font List and Schedule 

Jobs Report. Schedule Jobs 

Report shows the job list in 

pending, in delayed faxing or the 

Mailbox list as well.

You can print the amount of each 

category that your machine has 

printed so far.

It displays user login IDs and 

email.

You can print a report on the 

number of printouts based on 

paper size and type.

You can print a report on the 

number of printouts for each login 

user.

You can print a report on the 

machine's overall configuration.

You can set to print the 

information of a fax reports. 

•

Multi Send Report :  When 

you fax to several destinations, 

set this option to print a 

transmission report. Select On 

to print out a confirmation 

report every time you send a 

fax. Select On-Error to print 

out a report only when a 

transmission error occurs. 

•

Fax Send Report 
Appearance :  You can select 

whether the image on the 

confirmation report shows or 

not.

•

Fax Sent/Received Report : 
Select On to have the machine 

store all transmission logs and 

print out after every 50 logs. 

Select Off to have the machine 

store the log but not print out.

•

Fax Send Report :  The 

machine prints the 

confirmation report after each 

fax job, only when you send a 

fax to one destination.