Samsung SCX-6x22 Manual De Usuario

2.2   

<System setup>

To change the language that appears on the control panel, follow these 
steps:

Press Menu until System Setup appears on the bottom line of the 
display and press OK.

Press OK when Machine Setup appears.

Press the Scroll buttons until Language appears and press OK.

Press the Scroll buttons until the language you want appears and 
press OK.

Press Stop/Clear to return to Standby mode.

The current date and time are shown on the display when your machine 
is on and ready to work. All of your faxes will have the date and time 
printed on them.

If power to the machine is cut off, you need to reset the correct 
time and date once the power has been restored.

Press Menu until System Setup appears on the bottom line of the 
display and press OK.

Press OK when Machine Setup appears.

Press the Scroll buttons until Date & Time appears and press OK.

Enter the correct time and date using the number keypad. 

Month

= 01 to 12

Day

= 01 to 31

Year

= requires four digits

Hour

= 01 to 12 (12-hour mode) 

00 to 23 (24-hour mode)

Minute

= 00 to 59

The date format may differ from country to country.

You can also use the Scroll buttons to move the cursor under the 
digit you want to correct and enter a new number.

To select AM or PM for 12-hour format, press the 

 or 

 button or 

any number button.

When the cursor is not under the AM or PM indicator, pressing the 

 or 

 button immediately moves the cursor to the indicator.

You can change the clock mode to 24-hour format (e.g. 01:00 PM as 
13:00). For details, see the next section.

Press OK to save the time and date. 

When you enter a wrong number, Out of Range appears and the 
machine does not proceed to the next step. If this happens, simply 
reenter the correct number.

Press Stop/Clear to return to Standby mode.

You can set your machine to display the current time using either a 
12-hour or 24-hour format.

Press Menu until System Setup appears on the bottom line of the 
display and press OK.

Press OK when Machine Setup appears.

Press the Scroll buttons until Clock Mode appears and press OK. 

Press the Scroll buttons to select the other mode and press OK.

Press Stop/Clear to return to Standby mode.

You can switch this default mode between Fax mode and Copy mode.

Press Menu until System Setup appears on the bottom line of the 
display and press OK.

Press OK when Machine Setup appears.

Press the Scroll buttons until Default Mode appears and press OK.

Press the Scroll buttons until the default mode you want appears 
and press OK.

Press Stop/Clear to return to Standby mode.