Samsung SCX-6x22 Manual De Usuario

2.3   

<System setup>

You can control the following sounds:
• Key Sound: Turns the key sound on or off. With this option set to On

,

 

a tone sounds each time a key is pressed.

• Alarm Sound: Turns the alarm sound on or off. With this option set to 

,

 an alarm tone sounds when an error occurs or fax communication 

ends.

• Speaker: Turns on or off the sounds from the telephone line through 

the speaker, such as a dial tone or a fax tone. With this option set to 
Comm. which means “Common,” the speaker is on until the remote 
machine answers. 

You can adjust the volume level using On Hook Dial.

• Ringer: Adjusts the ringer volume. For the ringer volume, you can 

select Off, Low, Mid, and High. 

Press Menu until System Setup appears on the bottom line of the 
display and press OK.

Press the Scroll buttons until Sound/Volume appears and press 
OK.

Press the Scroll buttons until the sound option you want appears 
and press OK.

Press the Scroll buttons until the desired status or volume for the 
sound you have selected appears and press OK.

If necessary, repeat steps 3 through 5 to set other sounds.

Press Stop/Clear to return to Standby mode.

Press On Hook Dial. A dial tone sounds from the speaker.

Press the Scroll buttons until you hear the volume you want.

Press On Hook Dial to save the change and return to Standby 
mode.

You can adjust the speaker volume only when the telephone 
line is connected.

You can enter alphabet characters using the keyboard on the left side of 
the control panel. Especially this keyboard is arranged as like a normal 
keyboard for its better usability for user. In case of entering the machine 
ID or email addresses, it lets you enter letters easily. 

You can enter the alphabet characters by just pressing the alphabet keys 
on the keyboard, as like a normal keyboard. 

To enter the uppercase characters, press Caps Lock button on the 
keyboard.

To enter alphabet letters using the number keypad, see 
page 2.4. 

You can enter the numbers by using the number keypad on the right side 
of the control panel. 

You can enter symbols by pressing the buttons on the upper part of the 
keyboard. To enter upper symbols on buttons, press and hold the Shift 
button and the symbol button simutaneously which you want to enter. 

You can enter the special multilingual characters using the international 
button. 

Press the character button you want to enter.

Press the international button on the keyboard until the desired 
character you want displays. 

Example: To enter Â, press A key first. And then, press the 
international button three times until Â character shows.

Refer to the table below for international character map.

• To move the curser for correction, use the scroll buttons.
• The keyboard is used as the One-Touch dial numbers, when 
you send the fax. See page 10.3.

À, Á, Â, Ã, Ä, Å, Æ

à, á, â, ã, ä, å, æ

Ç

ç

È, É, Ê, Ë

è, é, ê,ë

Ì, Í, Î, Ï

ì, í, î, ï

Ñ

ñ

Ò, Ó, Ô, Õ, Ö, Œ, Ø

ò, ó, ô, õ, ö, œ, ø

Ù, Ú, Û, Ü

ù, ú, û, ü

ß

ß

Ý

ý