Samsung SCX-6x22 Manual De Usuario

3.1   

<Network setup>

This chapter gives you step-by-step instructions for setting up your 
machine for network connections.

This chapter includes:
•

Once you have connected your machine to a network with an RJ-45 
Ethernet cable, you can share the machine with other network users.

You need to set up the network protocols on the machine to use it as your 
network printer. Protocols can be set up by the following two methods: 

You can configure your machine’s print server settings and manage the 
machine via the following programs that came with your machine:
• SyncThru™ Web Admin Service: Web-based printer management 

solution for network administrators. SyncThru™ Web Admin Service 
provides you with an efficient way of managing network devices and 
lets you remotely monitor and troubleshoot network printers from any 
site with corporate intranet access.

• SyncThru™ Web Service: Web server embedded to your network 

print server, which allows you to:
-  show machine information.
-  Configure the network parameters necessary for the machine to 

connect to various network environments.

-  Customize the system, copy and fax settings.
-  Customize e-mail settings and set up Address Book for scanning 

to email.

-  Customize server settings and set up server list for scanning to the 

FTP or SMB servers.

-  Configure e-mail notification.
-  Upgrade the machine firmware

• SetIP: Utility program allowing you to select a network interface and 

manually configure the IP addresses for use with the TCP/IP protocol.

For further details, refer to the user’s guide on the network utilities CD that 
came with your machine.

You can set up the following basic network parameters through the 
machine’s control panel:
• Configure TCP/IP
• Configure EtherTalk
• Configure IPX frame types for NetWare

The following table shows the network environments supported by the 
machine: 

• IPX/SPX: Internet Packet eXchange/Sequenced Packet eXchange
• TCP/IP: Transmission Control Protocol/Internet Protocol
• DHCP: Dynamic Host Configuration Protocol
• BOOTP: Bootstrap Protocol

Your machine can be set up with a variety of TCP/IP network information, 
such as an IP address, a subnet mask, a gateway, and DNS addresses. 
There are several ways in which your machine can be assigned a TCP/
IP address, depending on your network.
• Static addressing: A TCP/IP address is assigned manually by the 

system administrator.

• Dynamic addressing via BOOTP/DHCP (default): A TCP/IP address is 

assigned automatically by the server.

Network interface

• 10/100 Base-TX

Network operating 
system

• Novell NetWare 4.x, 5.x, 6.x
• Windows 98/Me/NT 4.0/2000/XP
• Various Linux OS
• Macintosh OS 10.3 ~ 10.4

Network protocols

• NetWare IPX/SPX
• TCP/IP
• EtherTalk 

Dynamic addressing 
server

• DHCP, BOOTP