Samsung STP-102S Manual De Usuario

7

When the printer is used, use te optional AC adapter, AP-1611-UV for your printer.

Using an incorrect power supply may cause fire or electrical.

When connecting or disconnecting the power supply from the printer, make sure that
the power supply is not plugged into an electrical outlet ; otherwise you may damage
the power supply or the printer

1. Make sure that the printer's power switch is turned off, and that the power supply's
    power cord is unplugged from the electrical outlet.
2. Check the label on the power supply to make sure that the requird voltage matches
    that of your electrical outlet.
3. Plug the power supply's DC cable connector into the printer's power connector as
   shown below.

4. Plug the AC adapter's power cord into an electrical outlet.

8

STP-102S / STP-102P

You need an appropriate serial interface cable to connect your computer to the
printer's built-in interface.

1. Make sure that both the printer and computer are turned off :
    then plug the cable connector securely into the printer's interface connector.
2. Tighten the screws on both sides of the cable connector.

3. Plug the other end of the cable into the computer

25 Pin Male Type

NOTE
To remove the DC cable connector grasp the connector at the arrow and
pull it straight out. Make sure that the main unit's power cord is unplugged
before you disconnect the DC cable connector.