Samsung SRP-350PLUSA&C Manual De Usuario

The self-test checks whether the printer has any problems. If the printer does not function 
properly, contact your dealer. The self-test checks the following; 

2-1 Make sure paper roll has been installed properly. 

2-2 Turn on the power while holding down the FEED button. The self-test begins. 

2-3 The self-test prints the current printer status, which provides the control ROM version 

and the DIP switch setting. 

2-4 After printing the current printer status, self-test printing will print the following, 

  and pause (The PAPER LED light blinks).   

2-5 Press the FEED button to continue printing. 

  The printer prints a pattern using the built-in character set. 

2-6 The self-test automatically ends and cuts the paper after printing the following. 

2-7 The printer is ready to receive data as soon as it completes the self-test.