Samsung 3560 Manual De Usuario

Setting Up Your Printer

2.7

Connect one end of the Ethernet cable into the network 
port on the printer.

Connect the other end of the cable into a network LAN 
connection.

See your computer’s User’s Guide, if you need help.

If you install a wired and wireless network card, you can use 
your printer in a wireless environment by using a network 
antenna.
For the ML-3560, ML-3561N, ML-3561ND you need to install an 
optional wired and wireless network card. For details about 
installing the wired and wireless network card, see page 9.3.

: After connecting the printer, you need to configure the 

network parameters on the control panel. See page 8.2. You 

can use the software supplied with the card. Refer to the 

Software Section. 

To the network LAN 
connection

Connect one end of the supplied power cord into the power 
receptacle on the back of the printer. 

Connect the other end into a properly grounded AC outlet 
and turn on the printer using the power switch.

To view your display text in another language, see 
page 2.8.

:

• The fuser area inside the rear cover of your printer becomes 

very hot when in use. Take care not to burn your fingers 

when you access this area.

• Do not disassemble the printer with power on. If you do, you 

may receive an electric shock.

Print a demo page to make sure that the printer is operating 
correctly.

In ready mode, press the Menu button (

) on the 

control panel. You can see “Information” on the bottom 
line of the display.

Press the Enter button (

) to access the menu.

Press the scroll button (

 or 

) until you see “Demo 

Page” on the bottom line.

Press the Enter button (

).

A demo page prints out.

OFF ON