Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Samsung
  4. 3560
  5. Manual De Usuario

Samsung 3560 Manual De Usuario

Descargar
Página de 124
Setting Up Your Printer
2.8
Changing the Display Language
To change the language that is displayed on the control panel, 
follow these steps:
1
In ready mode, press the Menu button (
) on the 
control panel until you see “Setup” on the bottom line of 
the display.
2
Press the Enter button (
) to access the menu.
3
Press the scroll button (
 or 
) until you see “LCD 
Language” on the bottom line.
4
Press the Enter button (
) to confirm the menu item.
5
Press the scroll button (
 or 
) to display the language 
you want to use.
6
Press the Enter button (
) to save the selection.
7
Press the On Line/Continue button (
) to return to 
ready mode.
Using the Toner Save Mode
The Toner Save mode allows the printer to use less toner on 
each page. Activating this mode extends the life of your toner 
cartridge and reduces your cost per page beyond what one 
would experience in the normal mode, but it reduces print 
quality. This setting is not available with the 1200 dpi setting.
There are three ways to enable the Toner Save mode:
Using the Control Panel Button
Press the Toner Save button (
) on the control panel. The 
printer must be in ready mode; the On Line/Continue button 
(
) is on in green and “Ready” is shown on the display.
• If  the  Toner Save button backlight is on, the mode is 
enabled and the printer uses less toner to print a page.
• If  the  Toner Save button backlight is off, the mode is 
disabled and the printer prints in normal mode.
Using the Control Panel Menu
You can set the Toner Save item in the Graphics menu to turn 
the Toner Save mode on or off.
For further details about using the control panel menu, see 
page 3.2.
From the Software Application
You can set the Toner Save mode from the printer properties 
window on your printer driver. For details, see the Software 
Section.
Installing Printer Software
You must install software using the supplied Printer 
Drive CD after you have set up your printer and 
connected it to your computer. For details, see the 
Software Section
. 
The Printer Drive CD provides you with the following software:
If you are printing from Windows
You can install the following printer software using the Printer 
Drive CD.
• PCL printer driver for Windows. Use this driver to take 
full advantage of your printer’s features. See the 
Software Section
 
for details about installing the 
Samsung PCL printer driver.
• PostScript Printer Description (PPD) file for Windows 
to allow installation of the PostScript driver. 
To install the PostScript driver, you need to select Custom 
and put a check mark on the PostScript driver when you 
install the software. For details, see the Software 
Section.
• Smart Panel. Appears when printing errors occur. See the 
Software Section for details about installing the Smart 
Panel program. 
If you are printing in Linux
You can print from a Linux-based computer with your printer. 
Go to the Software Section for information about installing 
the Linux driver and printing from a Linux environment.
If you are printing from a Macintosh
You can print from a Macintosh with your printer. Go to the 
Software Section for information about installing the print 
software and printing from a Macintosh.