Samsung CLP-325W Manual De Usuario

Press this button and the green LED will start 

blinking. When the green LED stops blinking, 

release the button. 

Press this button and the green LED will start 

blinking. Release the button while it’s blinking. 

Introduction_ 27

•

The page will be printed on the default page like A4 or Letter.

•

You can only use this function with a USB-connected machine.

•

 can only be used with Windows and Macintosh 

operating systems.

•

You can use this function only when the Smart Panel program is 

installed.

 (CLP-320N(K)/CLP-321N only)

It prints a demo page by pressing this button only. The printed page shows 

the color print quality potential and overall print characteristics of the 

machine.

 

By pressing the Cancel (

) button, you can do the following functions.

In ready mode, press and hold this button for 

about 2 seconds until the status LED blinks 
slowly, and release (See "Printing a demo 

In ready mode, press and hold this button for 

about 5 seconds until the status LED blinks 

quickly, and release (See "Printing a machine 

report" on page 72).

Press Cancel (

) button during printing. The 

red LED blinks while the print job is cleared 

from both the machine and the computer and 

then the machine returns to ready mode. This 

may take some time depending on the size of 

the print job.

This feature automatically detects which WPS (Wi-Fi Protected Setup™) 

mode your access point uses. By pushing a button on the wireless LAN 

router / access point and the machine, you can setup the wireless network 
and security settings (See "Setting a wireless network with the WPS button" 

on page 41).

This button must be used to turn the machine on/off.

Plug in the power cord.

Press Power (

) button on the control panel.

If you want to turn the power off, press and hold this button for 

about 3 seconds.