Samsung CLP-325W Manual De Usuario

Wireless network setup (CLP-325W(K)/CLP-326W only)_ 42

Ensure you have the following items ready.

•

Access point

•

Network-connected computer

•

Software CD that was provided with your machine

•

The machine installed with a wireless network interface

•

USB cable

When the items are ready, follow the steps below:
1.

Check whether the USB cable is connected to the machine.

Turn on your computer, access point, and machine.

Insert the supplied software CD into your CD-ROM drive.

•

The software CD should automatically run and an installation 

window appear.

•

If the installation window does not appear, click on Start and then 

. Type X:\Setup.exe, replacing “X” with the letter which 

represents your drive. Click on OK.

•

If you use Windows Vista, Windows 7, or Windows Server 2008 R2 

click on Start > All programs > Accessories > Run.
Type X:\Setup.exe replacing “X” with the letter that represents 

your drive and click on OK.

•

If the AutoPlay window appears in Windows Vista, Windows 7, or 

Windows Server 2008 R2, click on Run Setup.exe in Install or 
run program

 field, and click on Continue or Yes in the User 

 window.

Select the Wireless Setting and Installation option.

•

If you have already set up the wireless network, click 

on this button to install the machine driver to use the wireless 

network machine. If you have not set up the wireless network, 

click on the Wireless Setting and Installation button to set up 

the wireless network before you click on this button. 

•

Configure the wireless network 

settings of your machine with a USB cable then install the 

machine driver. Only for the users who have not set up the 

wireless connection before.

Read the License Agreement, and select I accept the terms of the 

. Then, click on Next.

The software searches the wireless network.

If the search has failed, you may check if the USB cable is 

properly connected between the computer and machine, and 

follow the instructions on the window.

After searching, the window shows the wireless network devices. 

Select the name (SSID) of the access point you are using and click 

on Next.

If you cannot find out the network name you want to choose, or 

if you want to set the wireless configuration manually, click on 
Advanced Setting

.

•

Enter the SSID of 

access point you want (SSID is case-sensitive).

•

Select Infrastructure.

•

Select an authentication type.

Authentication is not used, and encryption 

may or may not be used, depending on the need for data 

security.
Shared Key: 

Authentication is used. A device that has a 

proper WEP key can access the network.
WPA Personal or WPA2 Personal: 

Select this option to 

authenticate the print server based on WPA Pre-Shared 

Key. This uses a shared secret key (generally called Pre- 

Shared Key pass phrase) which is manually configured on 

the access point and each of its clients.

•

Select the encryption (None, WEP64, WEP128, 

TKIP, AES, TKIP AES).

•

Enter the encryption network key value.

•

Confirm the encryption network key 

value.

•

If you are using WEP Encryption, select the 

appropriate WEP Key Index.

The wireless network security window appears when the 

access point has security setting.
The wireless network security window appears. The window 

may differ according to its security mode, WEP, or WPA.

•

Select Open System or Shared Key for the authentication 

and enter WEP security key. Click on Next.
WEP (Wired Equivalent Privacy) is a security protocol 

preventing unauthorized access to your wireless network. 

WEP encrypts the data portion of each packet exchanged 

on a wireless network using a 64-bit or 128-bit WEP 

encryption key.

•

Enter the WPA shared key and click on Next.
WPA authorizes and identifies users based on a secret key 

that changes automatically at regular intervals. WPA also 

uses TKIP (Temporal Key Integrity Protocol) and AES 

(Advanced Encryption Standard) for data encryption.

The window shows the wireless network settings and check if the 

settings are right. Click on Next.

•

For the DHCP method

If the IP address assignment method is DHCP, check if DHCP is 

shown in the window. However, if it shows Static, click on 
Change TCP/IP

 to change the assignment method to DHCP.

•

For the Static method

If the IP address assignment method is Static, check if Static is 

shown in the window. However, if it shows DHCP, click on 
Change TCP/IP

 to enter the IP address and other network 

configuration values for the machine. Before entering the IP 

address for the machine, you must know the computer’s network 

configuration information. If the computer is set to DHCP, you