Samsung CLP-325W Manual De Usuario

Wireless network setup (CLP-325W(K)/CLP-326W only)_ 43

must contact the network administrator to get the static IP 

address.
For example:
If computer’s network information is as shown below:

-

IP address: 169.254.133.42

-

Subnet Mask: 255.255.0.0

Then, the machine’s network information should be as below:

-

IP address: 169.254.133. 43 

-

Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.)

-

Gateway: 169.254.133.1

When the wireless network setting is completed, disconnect the USB 

cable between the computer and machine. Click on Next.

The Wireless Network Setting Complete window appears.

Select Yes if you accept the current settings and continue the setup 

procedure.
Select No if you want to return to the beginning screen. 
Then, click on Next.

Click on Next when the Confirm Printer Connection window 

appears.

Select the components to be installed. Click on Next.

After selecting the components, you can also change the machine 

name, set the machine to be shared on the network, set the machine 

as the default machine, and change the port name of each machine. 

Click on Next.

After the installation is finished, a window asking you to print a test 

page appears. If you want to print a test page, click on Print a test 
page

.

Otherwise, just click on Next and go to step 15.

If the test page prints out correctly, click on Yes.

If not, click on No to reprint it.

To register as a user of the machine in order to receive information 

from Samsung, click on On-line Registration.

Click on Finish.

If you do not have an access point (AP), you may still connect the 

machine wirelessly to your computer by setting up an Ad-Hoc wireless 

network by following the simple steps below.

Ensure you have the following items ready:

•

Network-connected computer

•

Software CD that was provided with your machine

•

The machine installed with a wireless network interface

•

USB cable

When the items are ready, follow the steps below:
1.

Check whether the USB cable is connected to the machine.

Turn on your computer and the wireless network machine.

Insert the supplied software CD into your CD-ROM drive.

•

The software CD should automatically run and an installation 

window appear.

•

If the installation window does not appear, click on Start and then 

. Type X:\Setup.exe, replacing “X” with the letter which 

represents your drive. Click on OK.

•

If you use Windows Vista, Windows 7, or Windows Server 2008 R2 

click on Start > All programs > Accessories > Run.
Type X:\Setup.exe replacing “X” with the letter that represents 

your drive and click on OK.

•

If the AutoPlay window appears in Windows Vista, Windows 7, or 

Windows Server 2008 R2, click on Run Setup.exe in Install or 
run program

 field, and click on Continue or Yes in the User 

 window.

Select the Wireless Setting and Installation option.

•

If you have set the wireless network, click on this 

button to install the machine driver to use the wireless network 

machine. If you have not set the wireless network, click on 
Wireless Setting and Installation

 button to set the wireless 

network before you click on this button. 

•

Configure the wireless network 

settings of your machine with a USB cable then install the 

machine driver. Only for users who have not set up the wireless 

connection before.

Read the License Agreement, and select I accept the terms of the 

. Then, click on Next.

The software searches the wireless network.

If the software has failed to search the network, check if the 

USB cable is connected properly between the computer and 

machine, and follow the instruction on the window.

After searching the wireless networks, a list of wireless networks your 

machine has searched appears. 
If you want to use the Samsung default ad-hoc setting, select the last 

wireless network on the list, Network Name(SSID) is portthru and 
Signal

 is Printer Self Network.

Then, click on Next.
If you want to use other ad-hoc settings, select another wireless 

network from the list. 

If you want to change ad-hoc settings click on the Advanced 
Setting

 button. 

•

Enter the SSID name 

you want (SSID is case-sensitive).

•

Select Ad-hoc.

•

Select the channel. (Auto Setting or 2412 MHz to 

2467 MHz).

•

Select an authentication type.

Authentication is not used, and encryption 

may or may not be used, depending on the need for data 

security.
Shared Key: 

Authentication is used. A device that has a