Samsung CLP-325W Manual De Usuario

•

Plug in the power cord and press Power (

) 

button on the control panel.

•

Disconnect the machine cable and reconnect it.

-

-

For Network 
(CLP-320N(K)/CLP-321N/CLP-325W(K)/ 

CLP-326W only)

Troubleshooting_ 79

Clear the paper jam (See "Clearing paper jams" 

on page 76).

•

Check the maximum paper capacity of the 

tray (See "Print media specifications" on 

page 92).

•

Make sure that you are using the correct type 

of paper (See "Print media specifications" on 

page 92).

•

Remove paper from the tray and flex or fan 

the paper.

•

Humid conditions may cause some paper to 

stick together, replace with a new stack.

Different types of paper may be stacked in the 

tray. Load paper of only one type, size and 

weight.

•

Remove any obstructions from inside the 

machine.

•

Paper has not been loaded correctly. Remove 

paper from the tray and reload it correctly.

•

There is too much paper in the tray. Remove 

excess paper from the tray.

•

The paper is too thick. Use only paper that 

meets the specifications required by the 

machine (See "Print media specifications" on 

page 92).

•

There is too much paper in the tray. Remove 

excess paper from the tray.

•

An incorrect type of paper is being used. Use 

only paper that meets the specifications 

required by the machine (See "Print media 

•

There may be debris inside the machine. 

Open the front cover and remove any debris.

Use only transparencies specifically designed 

for laser printers. Remove each transparency as 

it exits from the machine.

Ensure that the paper guides are against both 

sides of the envelopes.