Lexmark X646e Manual De Usuario
Encrypting the hard disk
121
Administrative support
6
Indicate the setting for each sub-item as required for the network environment.
7
Click
Submit
.
Confidential Print Setup
Confidential Print Setup allows the designation of a maximum number of PIN entry attempts and allows setting an
expiration time for print jobs. When a user exceeds a specific number of PIN entry attempts, all of that user’s print jobs are
deleted. When a user has not printed their jobs within a designated time period, the print jobs are deleted. To activate
Confidential Print Setup:
expiration time for print jobs. When a user exceeds a specific number of PIN entry attempts, all of that user’s print jobs are
deleted. When a user has not printed their jobs within a designated time period, the print jobs are deleted. To activate
Confidential Print Setup:
1
Open a Web browser. In the address line, enter the IP address of the MFP being configured using the format:
http://ip_address/
.
2
Click
Configuration
.
3
Under Other Settings, click
Security
.
4
Click
Confidential Print Setup
.
5
Set the value for the maximum number of invalid PINs allowed. Set Job Expiration to the maximum amount of time
before a submitted confidential print job is deleted.
before a submitted confidential print job is deleted.
6
Click
Submit
.
Encrypting the hard disk
Warning:
All resources on the hard disk will be deleted. Resources residing in flash memory or in RAM remain
unaffected.
unaffected.
Note:
This setting is only available on MFP models with an integrated internal hard disk drive.
1
Turn the MFP off. Wait 10 seconds.
2
Press and hold the
2
and
6
buttons on the numeric keypad while turning the MFP on.
3
Release the buttons when the touch screen blinks and is blank momentarily. Wait.
The
Config Menu
appears.
4
Touch the
down arrow
to scroll to
Disk Encryption
.
5
Touch the
right arrow
to enter the
Disk Encryption
menu.
6
Touch the
right arrow
next to
Enable
to encrypt the hard disk.
Contents will be lost. Continue?
appears.
7
Touch
Yes
to continue the process.
The Encrypting Disk progress bar appears.
Warning:
Do not power off the MFP until the process completes.
8
When hard disk encryption is finished, touch
Back
to return to the
Config Menu
.
9
Touch
Exit Config Menu
to exit.
To disable disk encryption:
1
Turn the MFP off. Wait 10 seconds.
2
Press and hold the
2
and
6
buttons on the numeric keypad while turning the MFP on.