OKI 6200E Manual De Usuario

Upon power-up, the main status indicator flashes 

orange. It changes to green when the Network Print 

Server passes self test. The indicator stays orange if 

the Network Print Server fails self test. If the indicator 

turns solid orange due to an error, a configuration 

sheet  prints automatically. Check the error message 

reported on the configuration sheet.

In most cases, the best way to restore the Network 

Print Server to factory defaults is via telnet. However, if 

you are unable to connect to the device because of a 

configuration error, use the following method which 

does not require a network connection.

To restore the Network Print Server to factory defaults, 

complete the following steps:

1. Power down the Network Print Server.

2. While holding in the Print Configuration Sheet 

Test button, power up the Network Print Server. 

Hold the button until the status indicator turns solid 

green.

3. Power cycle the Network Print Server. The defaults 

are now restored.