OKI B4545 MFP Manual De Usuario

Scanner and printer settings

841 OK - ADVANCED FCT / COPY / RESOLUTION 

+

The 

 parameter adjusts the photocopying resolution. Select 

, 

 or 

  using keys 

 or 

, then 

validate the choice with the OK key.

842 OK - ADVANCED FCT / COPY / ZOOMING

+

The 

 setting is used to reduce or enlarge part of the document by 

choosing the original and the zoom value to apply to the document, 25 
to 400 %. Enter the zoom value required using the keys of the digital 
key pad. Validate the choice with the OK key.

+

The special zoom values (141, 97, 94, 78, 71) are displayed with 
explanatory text (xx->yy).

+

You can enter any zoom value at any time via the numeric keypad; if 
the value entered does not correspond to a special value, the 
explanatory text disappears.

+

If a special zoom value is entered again, the explanatory text should 
reappear.

+

Validating a choice with the OK key will cause this choice to be set as 
the default value and a 10-second time delay to be set for the 
photocopier; if activated before the end of this time delay, the next local 
copy will have this same zoom value applied as a default.

+

Validating a choice with the COPY key will cause the local copy slip to 
be entered with the selected zoom value.

843 OK - ADVANCED FCT / COPY / ASSEMBLED

+

The ASSEMBLED parameter is used to define the choice of your printer 
outputs; either assembled or not assembled. Validate the choice with 
the OK key.

844 OK - ADVANCED FCT / COPY / ORIGIN

If you wish, you can change the origin of the scanner.
By entering new values of X and Y given in mm (X < 210 and Y < 286), you 
will move the scanning zone as shown on the figure below.

+

Select the X and Y coordinates with keys 

 or 

.