OKI B4545 MFP Manual De Usuario
91
Operation
+
Set the required coordinates with the numeric keypad or
or
. Confirm your setting by pressing key OK.
+
The
CONTRAST
parameter is used to select the photocopy
contrast. Adjust the contrast using keys
and
, then
validate the choice with the OK key.
+
You can also directly adjust the desired contrast using the
key, press this key several times until the required
adjustment is obtained without using
845.
+
The
LUMINOSITY
parameter is used to make your original
document lighter or darker. Adjust the brightness required
using keys
using keys
and
, then validate the choice with the OK key.
+
The
BINDING
parameter is used to choose the long or short
side according to the type of binding of your document. Make
your choice using keys
your choice using keys
and
, then validate the choice with
the OK key.
Caution -
All settings made using this menu become default
settings of the terminal.
+
Use keys
or
of the browser to scroll the setting described
below that you want to modify.
+
Validate your setting by pressing the OK key.
+
Select
NORMAL
or
THICK
paper using keys
and
.
+
Validate your setting by pressing the OK key.
Remark
: 1) When THICK paper type is selected, the print speed is slowed down.
2) Use the manual feeder for paper with a weight greater than 24 lb.
(90 g/m
(90 g/m
2)
.
+
Select the paper tray that you want to use;
AUTOMATIC
,
LOWER
or
UPPER
using keys
and
.
+
Validate by pressing the OK key.