Polycom A Manual De Usuario
Viewing People and Content
3–11
Accessing the Content Monitors in Standard OTX 100 Rooms
In standard OTX 100 rooms, there are two content monitors located in the
table.
Depending on how your system is configured, these two content monitors
Depending on how your system is configured, these two content monitors
may automatically lift when content is shared; therefore, be sure to keep the
area above the content monitors clear. Once the content monitors are raised,
they will remain raised until the end of the call, even if no content is being
shown. Also note that, if you are not in a call, content may also appear on the
two main display screens.
If you want to manually override the automatic feature and freely move the
If you want to manually override the automatic feature and freely move the
content monitors up and down, you can do so by using the Content Monitor
Lift button.
To access the content monitors in standard OTX 100 rooms:
1
Raise the content monitors by pressing the Content Monitor Lift button
located on the tabletop in front of each content monitor.
2
When you are done using the content monitors, press the Content
Monitor Lift button to lower each content monitor.
Accessing the Content Monitor in OTX 100 Compact Rooms
In OTX 100 Compact rooms, no content monitor is supplied. You may provide
your own and place it on the table or next to the video display. Note that
content cannot be displayed on the video display.
The OTX 100 Compact system does not provide a motorized content monitor
The OTX 100 Compact system does not provide a motorized content monitor
lift or content switch.
Using a Laptop in the Room
If you want to share content that is stored on your laptop, you must connect
the laptop to the appropriate content cable:
• For RPX suites, you will find the VGA and HDMI
• For RPX suites, you will find the VGA and HDMI
cables in the cable tray
at the center of the main table.
• For OTX rooms, you will find the VGA and HDMI cables in one of the
Collaboration Tanks, which are located between the tabletop content
monitors.
In addition, your laptop resolution must be supported by your codec.
Because of the OTX high gloss tabletop surface, Polycom recommends that you
use a quality optical mouse or trackball with your laptop.
use a quality optical mouse or trackball with your laptop.