ASUS P5G965 Manual De Usuario

10

Installation manual

4.  For SATA HDD: Connect the SATA 

signal and power plugs to the 

connectors at the back of the drive.

 

For IDE HDD: Connect the IDE and 

power plugs to the connectors at the 

back of the drive.

If you installed an optical and/or floppy disk drive, remove the bay cover(s) on the

front panel assembly before reinstalling it to the chassis. To do this:
1.  Locate the bay cover locks.

2.  Press the locks outward to release 

the bay cover.

3.  Push the bay cover inward, then set 

it aside.

4.  Follow the same instructions to 

remove the 3.5” drive bay cover.

Air duct

To reinstall the front panel assembly and side cover:
1.  Insert the front panel assembly hinge-like tabs to the holes on the right side 

of the chassis.

2.  Swing the front panel assembly to the left, then insert the hooks to the 

chassis until the front panel assembly fits in place.

3.  Insert the six side cover hooks into the chassis tab holes .

4.  Push the side cover to the direction of the front panel until it fits in place.

5.  Secure the cover with two screws you removed earlier.

2

1

3

2

5

5

1

1

2

2

4

Chassis tab holes