ASUS P5G965 Manual De Usuario

Installation manual

1.  Place the chassis upright, then 

remove the upper 3.5” drive bay 

metal plate cover.

2.  Insert the hard disk drive to the bay, 

then carefully push the drive until its 

screw holes align with the holes on 

the bay.

3.  Secure the hard disk drive with two 

screws on both sides of the bay.

1.  Place the chassis upright, then 

remove the lower 3.5” drive bay 

metal plate cover.

2.  Insert the floppy disk drive to the

bay, then carefully push the drive 

until its screw holes align with the 

holes on the bay.

3.  Secure the floppy disk drive with

two screws on both sides of the 

bay.

4.  Connect the signal (A) and power 

(B) plugs to connectors at the back 

of the drive.

1.  Place the chassis upright, then 

remove the upper 5.25” drive bay 

metal plate cover.

2.  Insert the optical drive to the bay, 

then carefully push the drive until its 

screw holes align with the holes on 

the bay.

3.  Secure the optical drive with two 

screws on both sides of the bay.

4.  Connect the IDE (A) and power (B) 

plugs to connectors at the back of 

the drive.

2

B

A

3

3

2

3

3

A

B

2

3

3