ASUS P5G965 Manual De Usuario

Installation manual

The system’s power supply unit has a 115

V/230 V voltage selector switch located 

beside the power connector. Use this 

switch to select the appropriate system 

input voltage according to the voltage 

supply in your area.
If the voltage supply in your area is 

100-127 V, set the switch to 115 V.
If the voltage supply in your area is 

200-240 V, set the switch to 230 V.

1.  Remove the cover screws on the rear panel.

2.  Pull the side cover toward the rear panel until its hooks disengage from the 

chassis tab holes. Set the side cover aside.

3.  Locate the front panel assembly hooks, then lift them until they disengage 

from the chassis.

4.  Swing the front panel assembly to the right, until the hinge-like tabs on the 

right side of the assembly are exposed.

5.  Remove the front panel assembly, then set aside.

Air duct

duct

1

1

2

2

4

3

4

4

3

3

3

Chassis tab holes

NOTE: Refer to the system User Guide for the exact location of the voltage selector.