Fujitsu BS2OSD Manual De Usuario
Page 34
*4
Innovations in IMON V3.0
*4
With IMON V3.0, delivery units that are parked on a key-formatted
*4
pubset can be installed on a non-key-formatted pubset.
*4
Previously, the statement GENERATE-IDF displayed all delivery
*4
units. Only the installed delivery units are now offered in the
*4
dialog.
*4
As of IMON V3.0, the TASKLIB and MACROLIB can also be installed
*4
under a default user ID (DEFLUID system parameter) other than
*4
TSOS. The parameter ZVDEFSUP in the IMON parameter file must be
*4
set to "Y" for this.
*4
Important note: if the parameter ZVDEFSUP is set to "Y", the two
*4
files $TSOS.TASKLIB and $TSOS.MACROLIB must be copied under the
*4
default user ID and deleted from under $TSOS before the next IMON
*4
installation.
*4
In addition, IMON V3.0 also contains preliminary functions for
*4
future hardware platforms and BS2000/OSD-BC versions.
CRTE-BASYS:
*4
The subsystem CRTEBASY of CRTE-BASYS V1.6 is available as a run-
time environment for BS2000-internal applications. This subsystem
should only be preloaded if this is recommended in the Release
should only be preloaded if this is recommended in the Release
Notice of another installed product.
By default the subsystem is loaded in upper class 4 memory. As an
alternative, the subsystem can also be loaded below 16 MB in
alternative, the subsystem can also be loaded below 16 MB in
class 4 memory using the SYSSSC file with the extension LOW
*4
(SYSSSC.CRTE-BASYS.016.LOW) if there is enough space available
there.
In addition, IMON copies the IC@RTSXS, IC@STLNK and IC@ULINK mod-
In addition, IMON copies the IC@RTSXS, IC@STLNK and IC@ULINK mod-
*4
ules from the SYSLNK.CRTE-BASYS.016.CLIB library to CLIB. If no
$.CLIB file exists on the source system it is created by IMON.
$.CLIB file exists on the source system it is created by IMON.
This $.CLIB can be used for programs which were compiled with C
V2.0 or earlier.
V2.0 or earlier.
The compatibility library SYSLNK.ILCS is also installed with
CRTE-BASYS.
If a default user ID other than TSOS is used (DEFLUID system pa-
rameter), it should be noted that during installation of CRTE-
rameter), it should be noted that during installation of CRTE-
BASYS not all libraries are automatically installed under the de-
fault user ID. When installation with IMON is completed, the
fault user ID. When installation with IMON is completed, the
$TSOS.CLIB file must be copied to $<default_user_ID>.CLIB.
3.4 Product use
All conversion activities for BS2000/OSD-BC V6.0 are described in
the manual BS2000/OSD-BC V6.0 Migration Guide.
An update to BS2000/OSD-BC V6.0 is possible on the basis of
BS2000 versions OSD-BC V4.0 and V5.0. A first-time installation
BS2000 versions OSD-BC V4.0 and V5.0. A first-time installation
of BS2000/OSD-BC V6.0 must be made for all earlier BS2000 ver-
sions. Configurations with V4.0 and V5.0 are possible with a
sions. Configurations with V4.0 and V5.0 are possible with a
shared pubset network using MSCF.