Fujitsu BS2OSD Manuale Utente

 

Page 34

 

  *4 

Innovations in IMON V3.0 
 

  *4 

With IMON V3.0, delivery units that are parked on a key-formatted 

  *4 

pubset can be installed on a non-key-formatted pubset.  

 

  *4 

Previously, the statement GENERATE-IDF displayed all delivery  

  *4 

units. Only the installed delivery units are now offered in the  

  *4 

dialog. 

 

  *4 

As of IMON V3.0, the TASKLIB and MACROLIB can also be installed  

  *4 

under a default user ID (DEFLUID system parameter) other than  

  *4 

TSOS. The parameter ZVDEFSUP in the IMON parameter file must be  

  *4 

set to "Y" for this.  

  *4 

Important note: if the parameter ZVDEFSUP is set to "Y", the two  

  *4 

files $TSOS.TASKLIB and $TSOS.MACROLIB must be copied under the  

  *4 

default user ID and deleted from under $TSOS before the next IMON 

  *4 

installation. 

 

  *4 

In addition, IMON V3.0 also contains preliminary functions for  

  *4 

future hardware platforms and BS2000/OSD-BC versions. 

 
 

CRTE-BASYS: 

  *4 

The subsystem CRTEBASY of CRTE-BASYS V1.6 is available as a run- 

time environment for BS2000-internal applications. This subsystem 
should only be preloaded if this is recommended in the Release 

Notice of another installed product. 

By default the subsystem is loaded in upper class 4 memory. As an 
alternative, the subsystem can also be loaded below 16 MB in 

class 4 memory using the SYSSSC file with the extension LOW 

  *4 

(SYSSSC.CRTE-BASYS.016.LOW) if there is enough space available 

there. 
In addition, IMON copies the IC@RTSXS, IC@STLNK and IC@ULINK mod- 

  *4 

ules from the SYSLNK.CRTE-BASYS.016.CLIB library to CLIB. If no 
$.CLIB file exists on the source system it is created by IMON. 

This $.CLIB can be used for programs which were compiled with C 
V2.0 or earlier. 

 
The compatibility library SYSLNK.ILCS is also installed with 

CRTE-BASYS. 
 

If a default user ID other than TSOS is used (DEFLUID system pa-
rameter), it should be noted that during installation of CRTE-

BASYS not all libraries are automatically installed under the de-
fault user ID. When installation with IMON is completed, the 

$TSOS.CLIB file must be copied to $<default_user_ID>.CLIB. 
 

 

 

All conversion activities for BS2000/OSD-BC V6.0 are described in 

the manual BS2000/OSD-BC V6.0 Migration Guide. 
 

An update to BS2000/OSD-BC V6.0 is possible on the basis of 
BS2000 versions OSD-BC V4.0 and V5.0. A first-time installation 

of BS2000/OSD-BC V6.0 must be made for all earlier BS2000 ver-
sions. Configurations with V4.0 and V5.0 are possible with a 

shared pubset network using MSCF.