Acer G5350 Series Manual De Usuario

69

Installing an expansion card

This section explains how to install an expansion card.  The onboard 
expansion slots supports PCI (Peripheral Component Interconnect) and 
PCI-X cards.  

To install an expansion card

1

Observe the ESD precautions and pre-installation instructions 
described on page 33.

2

Locate an empty expansion slot on the mainboard.

Note:  The SCSI RAID controller shown below is for your reference 
only. To purchase a SCSI RAID controller, contact your local Acer 
representative or order directly from
 http://www.acer.com/. 

3

Press the slot release latch outward (1).

4

Pull out the slot cover (2). Store it for reassembly later.

5

Remove the expansion card from its protective packaging.  

6

Align the card in the empty slot.   

7

Insert the card into the selected slot (3). Make sure that the card is 
properly seated.