Acer G5350 Series ユーザーズマニュアル

69

Installing an expansion card

This section explains how to install an expansion card.  The onboard 
expansion slots supports PCI (Peripheral Component Interconnect) and 
PCI-X cards.  

To install an expansion card

1

Observe the ESD precautions and pre-installation instructions 
described on page 33.

2

Locate an empty expansion slot on the mainboard.

Note:  The SCSI RAID controller shown below is for your reference 
only. To purchase a SCSI RAID controller, contact your local Acer 
representative or order directly from
 http://www.acer.com/. 

3

Press the slot release latch outward (1).

4

Pull out the slot cover (2). Store it for reassembly later.

5

Remove the expansion card from its protective packaging.  

6

Align the card in the empty slot.   

7

Insert the card into the selected slot (3). Make sure that the card is 
properly seated.