Compaq S6035IL Manual De Usuario

Upgrading and Servicing Guide    

 

 

1 Align the top of the front panel with the top of the 

chassis front. 

2 Press the panel onto the chassis at the top and at 

each side near the bottom until the panel snaps into 
place. 

 

 

 

 

A  Upper optical drive bay, may be a CD-ROM, CD-RW, 

DVD-ROM, DVD+RW/+R, or combination drive 

B  Lower optical drive bay, may be empty (blank plate) or a 

CD-ROM, CD-RW, DVD-ROM, DVD+RW/+R, or 
combination drive 

C  Memory card reader (select models) 
D  Diskette (floppy) drive (select models) 
E  Front connector panel (no replacement instructions) 
F  Hard disk drive 

 

 

Your PC has several drives that you can replace or 
upgrade. See the preceding topic, “locating 
components inside the PC“ for drive type and 
location. 

 

 

CAUTION: Back up your personal files on 
the hard disk drive to an external 
storage device, such as a CD, before 
removing the hard disk drive. Failure to 
do so will result in data loss. After 
replacing the hard disk drive, you need 
to run System Recovery using the 
recovery discs to load the factory-
installed files. See the User’s Guide for 
details about the recovery procedure. 

 

You can add an optical drive into an empty lower 
optical drive bay. 

 

 Before adding a new optical drive, 

make sure that it is compatible with the Microsoft

®

 

Windows

®

 XP operating system. Also, make sure you 

have the correct software and drivers for the optical 
drive to work with the operating system. 

1 Complete the procedures to prepare the PC, to 

remove the side panel, and to remove the front 
panel. See “opening and closing the pc“ on 
page 1. 

2 Locate the drive you want to remove.