Cisco Systems WSC2960XR48FPSI Manual De Usuario

Default VMPS Client Configuration

The following table shows the default VMPS and dynamic-access port configuration on client switches.

Table 13: Default VMPS Client and Dynamic-Access Port Configuration

Default Setting

Feature

None

VMPS domain server

60 minutes

VMPS reconfirm interval

VMPS server retry count

None configured

Dynamic-access ports

How to Configure VMPS

Entering the IP Address of the VMPS

If the VMPS is being defined for a cluster of switches, enter the address on the command switch.

Note

Before You Begin

You must first enter the IP address of the server to configure the switch as a client.

SUMMARY STEPS

1. configure terminal

2. vmps server ipaddress primary

3. vmps server ipaddress

4. end

5. show vmps

6. copy running-config startup-config

Catalyst 2960-XR Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX1

110

OL-29440-01

Configuring VMPS

Default VMPS Client Configuration