Cisco Systems WSC2960XR48FPSI Manual De Usuario
DETAILED STEPS
Purpose
Command or Action
Enters the global configuration mode.
configure terminal
Example:
Switch#
configure terminal
Step 1
Enters the IP address of the switch acting as the primary
VMPS server.
VMPS server.
vmps server ipaddress primary
Example:
Switch(config)#
vmps server 10.1.2.3 primary
Step 2
(Optional) Enters the IP address of the switch acting as a
secondary VMPS server.
secondary VMPS server.
vmps server ipaddress
Example:
Switch(config)#
vmps server 10.3.4.5
Step 3
You can enter up to three secondary server addresses.
Returns to privileged EXEC mode.
end
Example:
Switch(config)#
end
Step 4
Verifies your entries in the VMPS Domain Server field of
the display.
the display.
show vmps
Example:
Switch#
show vmps
Step 5
(Optional) Saves your entries in the configuration file.
copy running-config startup-config
Example:
Switch#
copy running-config startup-config
Step 6
Configuring Dynamic-Access Ports on VMPS Clients
Dynamic-access port VLAN membership is for end stations or hubs connected to end stations. Connecting
dynamic-access ports to other switches can cause a loss of connectivity.
dynamic-access ports to other switches can cause a loss of connectivity.
Caution
Catalyst 2960-XR Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX1
OL-29440-01
111
Configuring VMPS
Configuring Dynamic-Access Ports on VMPS Clients