Cisco Systems WSC2960XR48FPSI Manual De Usuario
Purpose
Command or Action
(Optional) Saves the configuration in the startup configuration file.
copy running-config startup-config
Step 7
Example:
Switch#
copy running-config
Only VTP mode and domain name are saved in the switch running
configuration and can be copied to the startup configuration file.
configuration and can be copied to the startup configuration file.
startup-config
Related Topics
VTP Modes, on page 15
Configuring a VTP Version 3 Password
You can configure a VTP version 3 password on the switch.
SUMMARY STEPS
1. configure terminal
2. vtp password password [hidden | secret]
3. end
4. show vtp password
5. copy running-config startup-config
DETAILED STEPS
Purpose
Command or Action
Enters the global configuration mode.
configure terminal
Example:
Switch#
configure terminal
Step 1
(Optional) Sets the password for the VTP domain. The password can
be 8 to 64 characters.
be 8 to 64 characters.
vtp password password [hidden | secret]
Example:
Switch(config)#
vtp password mypassword
Step 2
• (Optional) hidden—Saves the secret key generated from the
password string in the nram:vlan.dat file. If you configure a
takeover by configuring a VTP primary server, you are prompted
to reenter the password.
takeover by configuring a VTP primary server, you are prompted
to reenter the password.
hidden
• (Optional) secret—Directly configures the password. The secret
password must contain 32 hexadecimal characters.
Catalyst 2960-XR Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX1
26
OL-29440-01
Configuring VTP
Configuring a VTP Version 3 Password