Cisco Systems WSC2960XR48FPSI Manual De Usuario
Purpose
Command or Action
To clear the password, enter the no vtp password global
configuration command.
configuration command.
Note
Returns to privileged EXEC mode.
end
Example:
Switch(config)#
end
Step 3
Verifies your entries. The output appears like this:
show vtp password
Step 4
Example:
Switch#
show vtp password
VTP password: 89914640C8D90868B6A0D8103847A733
(Optional) Saves the configuration in the startup configuration file.
copy running-config startup-config
Example:
Switch#
copy running-config
Step 5
startup-config
Related Topics
Passwords for the VTP Domain, on page 21
Example: Configuring a Hidden Password, on page 35
Configuring a VTP Version 3 Primary Server
When you configure a VTP server as a VTP primary server, the takeover operation starts.
SUMMARY STEPS
1. vtp primary [vlan | mst] [force]
DETAILED STEPS
Purpose
Command or Action
Changes the operational state of a switch from a secondary server (the default) to a
primary server and advertises the configuration to the domain. If the switch password is
configured as hidden, you are prompted to reenter the password.
primary server and advertises the configuration to the domain. If the switch password is
configured as hidden, you are prompted to reenter the password.
vtp primary [vlan | mst] [force]
Example:
Switch#
vtp primary vlan
force
Step 1
• (Optional) vlan—Selects the VLAN database as the takeover feature. This is the
default.
Catalyst 2960-XR Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX1
OL-29440-01
27
Configuring VTP
Configuring a VTP Version 3 Primary Server