Cisco Systems WSC2960XR48FPSI Manual De Usuario

Purpose

Command or Action

Verifies the change to the port.

show running-config interface interface-id

Example:

Switch#

show running-config interface

Step 5

gigabitethernet1/0/1

Verifies the configuration.

show vtp status

Example:

Switch#

show vtp status

Step 6

Adding a VTP Client Switch to a VTP Domain

Follow these steps to verify and reset the VTP configuration revision number on a switch before adding it to
a VTP domain.

Before You Begin

Before adding a VTP client to a VTP domain, always verify that its VTP configuration revision number is
lower than the configuration revision number of the other switches in the VTP domain. Switches in a VTP
domain always use the VLAN configuration of the switch with the highest VTP configuration revision number.
With VTP versions 1 and 2, adding a switch that has a revision number higher than the revision number in
the VTP domain can erase all VLAN information from the VTP server and VTP domain. With VTP version
3, the VLAN information is not erased.

You can use the vtp mode transparent global configuration command to disable VTP on the switch and then
to change its VLAN information without affecting the other switches in the VTP domain.

SUMMARY STEPS

1. show vtp status

2. configure terminal

3. vtp domain domain-name

4. end

5. show vtp status

6. configure terminal

7. vtp domain domain-name

8. end

9. show vtp status

Catalyst 2960-XR Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX1

OL-29440-01

Configuring VTP

Adding a VTP Client Switch to a VTP Domain