Cisco Systems WSC2960XR48FPSI Manual De Usuario
Purpose
Command or Action
Returns to privileged EXEC mode. The VLAN information on the
switch is updated.
switch is updated.
end
Example:
Switch(config)#
end
Step 8
(Optional) Verifies that the domain name is the same as in Step 1
and that the configuration revision number is 0.
and that the configuration revision number is 0.
show vtp status
Example:
Switch#
show vtp status
Step 9
Related Topics
VTP Domain, on page 14
Monitoring VTP
This section describes commands used to display and monitor the VTP configuration.
You monitor VTP by displaying VTP configuration information: the domain name, the current VTP revision,
and the number of VLANs. You can also display statistics about the advertisements sent and received by the
switch.
and the number of VLANs. You can also display statistics about the advertisements sent and received by the
switch.
Table 6: VTP Monitoring Commands
Purpose
Command
Displays counters about VTP messages that have been
sent and received.
sent and received.
show vtp counters
Displays information about all VTP version 3 devices in
the domain. Conflicts are VTP version 3 devices with
conflicting primary servers. The show vtp devices
command does not display information when the switch
is in transparent or off mode.
the domain. Conflicts are VTP version 3 devices with
conflicting primary servers. The show vtp devices
command does not display information when the switch
is in transparent or off mode.
show vtp devices [conflict]
Displays VTP status and configuration for all interfaces
or the specified interface.
or the specified interface.
show vtp interface [interface-id]
Displays the VTP password. The form of the password
displayed depends on whether or not the hidden keyword
was entered and if encryption is enabled on the switch.
displayed depends on whether or not the hidden keyword
was entered and if encryption is enabled on the switch.
show vtp password
Displays the VTP switch configuration information.
show vtp status
Catalyst 2960-XR Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX1
34
OL-29440-01
Configuring VTP
Monitoring VTP