Cisco Systems WSC2960XR48FPSI Manual De Usuario
VLANDB Yes 00d0.00b8.1400=00d0.00b8.1400 1 stp7
Do you want to continue (y/n) [n]?
Do you want to continue (y/n) [n]?
y
Related Topics
Configuring a VTP Version 3 Primary Server, on page 27
Example: Configuring VTP on a Per-Port Basis
This example shows how to configure VTP on a per-port basis:
Switch(config)#
interface gigabitethernet 1/0/1
Switch(config-if)#
vtp
Switch(config-if)#
end
Related Topics
Configuring VTP on a Per-Port Basis, on page 31
Where to Go Next
After configuring VTP, you can configure the following:
• VLANs
• VLAN trunking
• Private VLANs
• VLAN Membership Policy Server (VMPS)
• Tunneling
• Voice VLANs
Additional References
Related Documents
Document Title
Related Topic
Catalyst 2960-XR Switch VLAN Management
Command Reference
Command Reference
For complete syntax and usage information for the
commands used in this chapter.
commands used in this chapter.
Standards and RFCs
Title
Standard/RFC
—
—
Catalyst 2960-XR Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX1
36
OL-29440-01
Configuring VTP
Example: Configuring VTP on a Per-Port Basis