Cisco Systems WSC4500X16SFP Manual De Usuario

Switch# show vmps

VQP Client Status:

--------------------

VMPS VQP Version:   1

Reconfirm Interval: 60 min

Server Retry Count: 3

VMPS domain server: 172.20.128.179 (primary, current)

                    172.20.128.178

 

Reconfirmation status

---------------------

VMPS Action:         No Dynamic Port

To configure a dynamic access port on a VMPS client switch, perform this task:

This example shows how to configure a dynamic access port and to verify the entry:

Switch# configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

Switch(config)# interface fa1/1

Switch(config-if)# switchport mode access

Switch(config-if)# switchport access vlan dynamic

Switch(config-if)# end

Switch# show interface fa1/1 switchport

Name: Fa0/1

Switchport: Enabled

Administrative mode: dynamic auto

Operational Mode: dynamic access

Administrative Trunking Encapsulation: isl

Operational Trunking Encapsulation: isl

Negotiation of Trunking: Disabled

Access Mode VLAN: 0 ((Inactive))

Trunking Native Mode VLAN: 1 (default)

Trunking VLANs Enabled: NONE

Pruning VLANs Enabled: NONE 

Switch# configure terminal

Enters global configuration mode.

Switch(config)# interface 

interface

Enters interface configuration mode and specifies the port to be 
configured.

Switch(config-if)# switchport mode 

Sets the port to access mode.

Switch(config-if)# switchport access 

Configures the port as eligible for dynamic VLAN access.

Switch(config-if)# end

Returns to privileged EXEC mode.

Switch# show interface 

interface 

Verifies the entry.