Cisco Systems ASR 9000 Manual De Usuario
F I N A L D R A F T — C i s c o C o n f i d e n t i a l
5-2
Cisco ASR 9000 Series Aggregation Services Router Getting Started Guide
OL-17502-01
Chapter 5 CLI Tips, Techniques, and Shortcuts
CLI Tips and Shortcuts
Using the Question Mark (?) to Display On-Screen Command Help
Use the question mark (?) to learn what commands are available and the correct syntax for a command.
summarizes the options for on-screen help.
Tip
The space (or no space) before the question mark (?) is significant. If you include a space before the
question mark, the system displays all available options for a command or CLI mode. If you do not
include a space, the system displays a list of commands that begin with a particular character string.
question mark, the system displays all available options for a command or CLI mode. If you do not
include a space, the system displays a list of commands that begin with a particular character string.
Table 5-1
On-Screen Help Commands
The following example shows how to add an entry to access list 99. The added entry denies access to all
hosts on subnet 172.0.0.0 and ignores bits for IPv4 addresses that start within the range of 0 to 255. The
following steps provide an example of on-screen command help:
hosts on subnet 172.0.0.0 and ignores bits for IPv4 addresses that start within the range of 0 to 255. The
following steps provide an example of on-screen command help:
Step 1
Type the access-list command, followed by a space and a question mark, to list the available options for
the command:
the command:
RP/0/RSP0/CPU0:router(config)# ipv4 access-list ?
log-update Control access lists log updates
maximum Out of resources configration
WORD Access list name - maximum 32 characters
Command
Description
partial-command?
Type a question mark (?) at the end of a partial command to list the commands that begin with those
characters.
characters.
RP/0/RSP0/CPU0:router# co?
configure copy
Note
Do not include a space between the command and question mark.
?
Lists all commands available for a particular command mode.
command ?
Include a space before the question mark (?) to list the keywords and arguments that belong to a
command.
command.
RP/0/RSP0/CPU0:router# configure ?
exclusive Configure exclusively from this terminal
terminal Configure from the terminal
<cr>
Note
For most commands, the
<cr>
symbol indicates that you can execute the command with the
syntax already entered. For the preceding example, press Enter to enter global configuration
mode.
mode.
command keyword ? Type a question mark (?) after the keyword to list the next available syntax option for the command.
RP/0/RSP0/CPU0:router# show aaa ?
taskgroup Show all the local taskgroups configured in the system
userdb Show all local users with the usergroups each belong to
usergroup Show all the local usergroups configured in the system
Note
Include a space between the keyword and question mark.