Cisco Systems ASR 9000 Manual De Usuario
F I N A L D R A F T — C i s c o C o n f i d e n t i a l
4-23
Cisco ASR 9000 Series Aggregation Services Router Getting Started Guide
OL-17502-01
Chapter 4 Configuring Additional Router Features
Configuration Limiting
Number of Parallel Links (max-paths): Example
In the following example, the maximum paths command is used to set the maximum number of parallel
routes:
routes:
RP/0/RSP1/CPU0:router# configure
RP/0/RSP1/CPU0:router(config)# router ospf 100
RP/0/RSP1/CPU0:router(config-router)# maximum paths 10
RP/0/RSP1/CPU0:router(config-router)# end
Uncommitted changes found, commit them? [yes]: y
RP/0/RSP1/CPU0:Mar 30 18:05:13 : config[65740]: %LIBTARCFG-6-COMMIT : Configuration
committed by user 'cisco'. Use 'show configuration commit changes 1000000542' to view
the changes.
RP/0/RSP1/CPU0:Mar 30 18:05:13 : config[65740]: %SYS-5-CONFIG_I : Configured from console
by cisco
RP/0/RSP1/CPU0:router#
Routing Policy Language Line and Policy Limits
Two limits for Routing Policy Language (RPL) configurations exist:
1.
Number of RPL lines: The number of configuration lines entered by the user, including the
beginning and ending statements (that is “route-policy”). The number of configuration lines for sets
is also included.
beginning and ending statements (that is “route-policy”). The number of configuration lines for sets
is also included.
2.
Number of RPL policies: The number of policies that can be configured on the router. Policies are
counted only once: Multiple use of the same policy counts as a single policy toward the limit 1.
counted only once: Multiple use of the same policy counts as a single policy toward the limit 1.
. You can change the default values up
to the absolute maximum, but you cannot change the value to a number less than the number of items
that are currently configured.
that are currently configured.
Examples
In the following example, the show rpl maximum command is used in EXEC mode to display the
current setting for RPL limits and number of each limit currently in use. A summary of the memory used
by all of the defined policies is also shown below the limit settings.
current setting for RPL limits and number of each limit currently in use. A summary of the memory used
by all of the defined policies is also shown below the limit settings.
RP/0/RSP1/CPU0:router# show rpl maximum
Current Current Max
Total Limit Limit
------------------------------------------------------------
Lines of configuration 0 65536 131072
Policies 0 3500 5000
Compiled policies size (kB) 0
RP/0/RSP1/CPU0:router#
Table 4-7
Maximum Lines of RPL: Configuration Limits and Commands
Limit Description
Default
Maximum
Limit
Maximum
Limit
Absolute
Maximum
Limit
Maximum
Limit
Configuration Command
(Global Configuration Mode)
(Global Configuration Mode)
Show Current Settings
Command
(EXEC Mode)
Command
(EXEC Mode)
Maximum number of RPL lines
65,536
131,072
rpl maximum lines n
show rpl maximum lines
Maximum number of RPL policies
3500
5000
rpl maximum policies n
show rpl maximum
policies
policies