Cisco Systems IGX 8400 Series Manual De Usuario

3-42 Cisco IGX 8400 Series Installation and Configuration

After the workstation and IGX node interface have been set up, Cisco WAN Manager can
be started. After Cisco WAN Manager has started and the communication sockets are
active, the dsplan screen looks like this:

D2.cb1         LAN   cisco IGX 8410    9.3 Feb. 27 2000 14:27 PST

Active IP Address:                     192.187.207.21

IP Subnet Mask:                        255.255.255.0

TCP Service Port:                      5130

Default Gateway IP Address:            192.187.207.1

Maximum LAN Transmit Unit:             1500

Ethernet Address:                      00.55.43.00.04.55

Control Socket - Ready

Base Socket Descriptor - 1

Open Socket Descriptor - 2

Last Command: dsplan

Next Command:

“Sockets” is the BSD UNIX name for connections between processes and

typically applies to network communication.

Before switching on the Cisco WAN Manager workstation, refer to the Cisco WAN

Manager Operations publication.