Cisco Systems IGX 8400 Series Manual De Usuario
Card Installation and Node Startup 3-43
Attaching Peripherals
Figure 3-18
SV+ LAN Connection via Router to an IGX Node
Figure 3-19
SV+ LAN Connection to an IGX Node (No Gateway)
Step 7
Switch on the control terminal (or Cisco WAN Manager workstation). Adjust the
terminal’s configuration, if necessary, to match the default settings of the control terminal
port in the IGX node. See the Cisco WAN Manager Operations publication for settings
and operating instructions for the workstations.
terminal’s configuration, if necessary, to match the default settings of the control terminal
port in the IGX node. See the Cisco WAN Manager Operations publication for settings
and operating instructions for the workstations.
Connecting a Network Management Station to Multiple Networks
When a network management station has more than one serial port, ports can connect to different
networks. When the number of workstation serial ports is less than the number of networks to be
managed, a terminal server is necessary to obtain a communications link to the separate networks.
This subject is covered in the Cisco WAN Manager Installation publication.
networks. When the number of workstation serial ports is less than the number of networks to be
managed, a terminal server is necessary to obtain a communications link to the separate networks.
This subject is covered in the Cisco WAN Manager Installation publication.
Note: IP numbers are representative only.
SCM
SV+
AUI
192.187.207.21
192.187.207.200
H8374
192.187.210.1
192.187.210.30
192.187.207.11
192.187.207.1
Backbone
Router
Router
Note: IP numbers are representative only.
SCM
SV+
AUI
192.187.207.30
192.187.207.200
H8375