Cisco Systems EA6500 Manual De Usuario

To enable PFC QoS statistics data export for a port, perform this task:

This example shows how to enable PFC QoS statistics data export on FastEthernet port 5/24 and verify 
the configuration:

Router# configure terminal 

Router(config)# interface fastethernet 5/24 

Router(config-if)# mls qos statistics-export 

Router(config-if)# end 

Router# show mls qos statistics-export info 

QoS Statistics Data Export Status and Configuration information

---------------------------------------------------------------

Export Status : enabled

Export Interval : 300 seconds

Export Delimiter : |

Export Destination : Not configured

QoS Statistics Data Export is enabled on following ports:

---------------------------------------------------------

FastEthernet5/24

Router#

When enabled on a port, PFC QoS statistics data export contains the following fields, separated by the 
delimiter character:

Export type (“1” for a port)

Slot/port

Number of ingress packets

Number of ingress bytes

Number of egress packets

Number of egress bytes

Time stamp

Router(config)# interface type

1

1.

type = ethernet, fastethernet, gigabitethernet, or tengigabitethernet 

Selects the interface to configure.

Router(config-if)# mls qos statistics-export 

Enables PFC QoS statistics data export for the port. 

Router(config-if)# no mls qos statistics-export 

Disables PFC QoS statistics data export for the port. 

Router(config)# end 

Exits configuration mode.

Router# show mls qos statistics-export info 

Verifies the configuration.