Cisco Systems EA6500 Manual De Usuario

To enable PFC QoS statistics data export for a named aggregate policer, perform this task:

This example shows how to enable PFC QoS statistics data export for an aggregate policer named 
aggr1M and verify the configuration:

Router# configure terminal 

Router(config)# mls qos statistics-export aggregate-policer aggr1M 

Router(config)# end 

Router# show mls qos statistics-export info 

QoS Statistics Data Export Status and Configuration information

---------------------------------------------------------------

Export Status : enabled

Export Interval : 300 seconds

Export Delimiter : |

Export Destination : Not configured

QoS Statistics Data Export is enabled on following ports:

---------------------------------------------------------

FastEthernet5/24

QoS Statistics Data export is enabled on following shared aggregate policers:

-----------------------------------------------------------------------------

aggr1M

Router#

When enabled for a named aggregate policer, PFC QoS statistics data export contains the following 
fields, separated by the delimiter character:

Export type (“3” for an aggregate policer)

Aggregate policer name 

Direction (“in”)

PFC or DFC slot number

Number of in-profile packets 

Number of packets that exceed the CIR 

Number of packets that exceed the PIR 

Time stamp

Router(config)# mls qos statistics-export 

 aggregate_policer_name 

Enables PFC QoS statistics data export for a named 
aggregate policer. 

Router(config)# no mls qos statistics-export 

 aggregate_policer_name 

Disables PFC QoS statistics data export for a named 
aggregate policer. 

Router(config)# end 

Exits configuration mode.

Router# show mls qos statistics-export info 

Verifies the configuration.