Cisco Systems EA6500 Manual De Usuario
37-5
Catalyst 6500 Series Switch Cisco IOS Software Configuration Guide—Release 12.1 E
78-14099-04
Chapter 37 Configuring the Switch Fabric Module
Monitoring the Switch Fabric Module
Configuring an LCD Message
To configure a message for display on the LCD, perform this task:
When configuring a message for display on the LCD, note the following syntax information:
•
The d parameter is a delimiting character. You cannot use the delimiting character in the message.
The delimiter is a character of your choice—a pound sign (#), for example.
The delimiter is a character of your choice—a pound sign (#), for example.
•
You can use the following tokens, in the form $(token), in the message text:
–
$(hostname)—Displays the switch’s host name.
–
$(domain)—Displays the switch’s domain name.
Monitoring the Switch Fabric Module
The Switch Fabric Module supports a number of show commands for monitoring purposes. A fully
automated startup sequence brings the module online and runs the connectivity diagnostics on the ports.
automated startup sequence brings the module online and runs the connectivity diagnostics on the ports.
These sections describe how to monitor the Switch Fabric Module:
•
•
•
•
•
•
Note
The Switch Fabric Module does not require any user configuration.
Displaying the Module Information
To display the module information, perform this task:
Command
Purpose
Router(config)# fabric lcd-banner d message d
Configures a message for display on the LCD.
Router(config)# no fabric lcd-banner
Clears the message displayed on the LCD.
Command
Purpose
Router# show module {5 | 6 | 7 | 8}
Displays module information.