Cisco Systems EA6500 Manual De Usuario

   client count = 11

 client_notification_TMR = 30000 milliseconds

          keep_alive TMR = 4000 milliseconds

        keep_alive count = 0

    keep_alive threshold = 7

           RF debug mask = 0x0

Router#

During normal operation, the startup-config and config-registers configuration are synchronized by 
default between the two supervisor engines. In a switchover, the new active supervisor engine uses the 
current configuration. 

To manually synchronize the configurations used by the two supervisor engines, perform this task on the 
active supervisor engine:

The auto-sync standard command does not synchronize the boot variables.

This example shows how to reenable the default automatic synchronization feature using the auto-sync 
standard command to synchronize the startup-config and config-register configuration of the active 
supervisor engine with the redundant supervisor engine:

Router(config)# redundancy

Router(config-red)# main-cpu

Router(config-r-mc)# auto-sync standard

Router(config-r-mc)# auto-sync bootvar

Router(config-r-mc)# end

Router# copy running-config startup-config

To manually synchronize only individual elements of the standard auto-sync configuration, disable 
the default automatic synchronization feature.

This example shows how to disable default automatic synchronization and only allow automatic 
synchronization of the config-registers of the active supervisor engine to the redundant supervisor 
engine while disallowing synchronization of the startup configuration:

Router(config)# redundancy

Router(config-red)# main-cpu

Router(config)# redundancy 

Enters redundancy configuration mode.

Router(config-red)#

 

 

Enters main-cpu configuration submode.

Router(config-r-mc)# auto-sync {startup-config | 

 | bootvar | standard} 

Synchronizes the configuration elements.

Router(config-r-mc)# end 

Returns to privileged EXEC mode.

Router# copy running-config startup-config 

Forces a manual synchronization of the configuration 
files in NVRAM. 

This step is not required to synchronize the 
running configuration file in DRAM.