Cisco Systems SG100D08PNA Manual De Usuario
Cisco SG100D-08 Unmanaged Gigabit Switch Quick Start Guide
6
S
TEP
3
Insert a screw into each hole, leaving a gap between the surface
and the base of the screw head of at least 0.1 inches (3 mm).
and the base of the screw head of at least 0.1 inches (3 mm).
S
TEP
4
Place the unmanaged switch wall-mount slots over the screws and
slide the unmanaged switch down until the screws fit snugly into
the wall-mount slots.
slide the unmanaged switch down until the screws fit snugly into
the wall-mount slots.
S
TEP
5
Connect the unmanaged switch to the other devices, as described
in the
in the
section.
Flat Surface Installation
To deploy the device on a desktop or other flat surface:
S
TEP
1
Place the unmanaged switch on a desktop near an AC power
source.
source.
S
TEP
2
Connect the unmanaged switch to the other devices, as described
in the
in the
section.