Cisco Systems SG100D08PNA Manual De Usuario

 

This section describes the process for connecting the device to the 
network.

Power down all of the devices you want to connect to the switch.

Connect the Ethernet cable to the Ethernet port of a PC, printer, 
network storage, or other network device. 

We recommend using Cat5e or better cable. Also, do not 
exceed the maximum cabling distance of 328 feet (100 meters) 
per segment.

Connect the other end of the network Ethernet cable to one of the 
numbered unmanaged switch Ethernet ports. 

Repeat 

 and 

 for each device you want to connect to 

the unmanaged switch.

Make sure you use the power adapter included with the 
switch. Using a different power adapter might damage the 
switch.

Connect the power adapter to the power port on the back panel of 
the unmanaged switch.

Power up the devices connected to the switch. The LED of each 
active port on the switch lights.

To prioritize voice or video traffic by using the QoS feature on the 
Cisco SG 100D-08, set flow control to 

off in the configurations 

of the connected devices. Otherwise, flow control might send a 
pause frame to the switch, blocking the high-priority QoS 
packets queued on the port. On some devices, such as some IP 
phones and IP cameras, flow control might not be configurable.