Cisco Systems SPS224G4 Manual De Usuario
QoS Commands
policy-map
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
273
23
Default Configuration
No match criterion is supported.
Command Mode
Class-map Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example defines the match criterion for classifying traffic as an
access group called ‘enterprise’ in a class map called ‘class1’.
access group called ‘enterprise’ in a class map called ‘class1’.
Console (config)# class-map class1
Console (config-cmap)# match access-group enterprise
policy-map
The policy-map Global Configuration mode command creates a policy map and
enters the Policy-map Configuration mode. Use the no form of this command to
delete a policy map.
enters the Policy-map Configuration mode. Use the no form of this command to
delete a policy map.
Syntax
policy-map
policy-map-name
no policy-map
policy-map-name
Parameters
•
policy-map-name
— Specifies the name of the policy map (Range: 0-32
characters).